| Subject | Text |
| Sounds like the vert section of your board is faulty.
I'd replace the vert IC and all supporting |
| More likely, it is a flashover in the CRT from the EHT (anode) supply to the focus or screen grid, a |
|
|
| [quote:870035cc61="paperson"][quote:870035cc61="tmcu"]I believe this is a vin-coded radio , it is li |
| sharp GA 20 chassis | go to this address for full spec on GA20 chassis
chemise.free.fr/ga20_training.pdf[/b] |
| Belfuse 2000-1 Zenith No.136-66 | Hi,
I have a "Belfuse 2000-1 Zenith No.136-66" and I need the spec to replace it, spcifia |
| AKAI s900 power supply | hi
i am trying to repair an AKAI s900 sampler.
basically there are two main boards, the voi |
| If the spec is the same then just replace the jack plug on the new unit to fit or obtain one with un |
| replace mosfet | i need to replace a mosfet in a backlight inverter,
the spec of it is here:
http://www.spectec |
| But you've converted your 20MHz generator into a 1MHz generator.
OPA547 slew rate is 6V/us, while t |
| JVC XV-THA30 DVD Surround Receiver Problem | Hello Techs
I have a JVC home threater model XV-THA30, upon power up, the front displays "wait" a |
| Help required panasonic Game cube thing (Japanese domestic) | Can anyone help with a schematic, particularly the power supply side. The kids plugged it into the p |
| Yesterday, I received the spare-part. I changed the defective part, but there must be another defect |
| If it is an electrolytic it should read something briefly. If you can get a service manual, the part |
| 40 turn trimmer potentiometers | Where can I buy 40 turn Potentiometers for replacing old pots on a Pioineer Spec II amplifier. |
| Re: Code Renault Pioneer | [quote:ca454778df="Jiult"]Pioneer deh-2006RDS
Ministero P.T.
( D.M. 25.6.85 )
( D.M. 27.8.87 ) |
| Your meter has a battery in it. On the ohms scale, current flows from it into the capacitor the need |
| The transformer I use lists 100% isolation under it's specifications. I have seen this spec on some |
|
|
| KEC TV 13.5 volt DC input jack replacement | I have this KEC TV in my van. The DC input jack is damaged and I don't know where to find a new one |
| The Toshiba TV repair 32C3035D | The problem is due to 2 inverter boards, one of which goes faulty. The cost of the 2 boards as a pai |
| Ic | Thanks for the info. I will try those sites. I just can't seem to find any spec listings for either |
| I am looking at the board and its definitely C725. The capacitor is a blue ceramic and it actually b |
| 1992 Toshiba CN3081B Cinema Series | Well, here I am again with the same problem . I have replaced the IC LA7837 and the 100uF and 220uF |
| Re: denon udm3 | [quote:9288a09cb3="guest"]Yep - I have exactly the same problem. CD tray won't eject. No motors
ru |
| Item Code: MGC803-500ML
PROJECTION CRT FLUID 500ml/17oz
View detailed spec sheet Over 2 EACH Pri |
| Re: Code for Renault | [quote:d5a5014c57="Yashka"]Renault Espace 3
Can you help me with this radio?
PIONEER KEH-M106 |
| Four Terminal SCR Testing | Pardon my ignorance, but what is a four-terminal SCR? What does the fourth terminal do? Do you hav |
| I know, it is what I done. You didn't on these site as I can see. there is nos spec for the fuse; th |
| Re: Code Renault Pioneer | [quote:34c9143706="tmcu"][quote:34c9143706="Jiult"][quote:34c9143706="tmcu"][quote:34c9143706="Jiult |
| similar EEprom HN5864 | Some body, help me
What is IC eeprom simmilar or equal with HN5864 from Hitachi
spec TTL , can i |
| Toshiba SD-3107U Optical Pickup needed... | Can anybody help me obtain one of these pickups? I know the player is old, but I really liked the pi |